Deep Groove Ball Bearings

TG manufacture a full range of deep groove ball bearings. These bearings are the most common type and are used in a wide variety of applications. Design Attributes : Newly developed seals (double-lip labyrinth RS2): Improved protection against contamination with low friMore »

Tapered Roller Bearings

Tapered roller bearings consist of four interdependent components: the cone, or inner ring; the cup, or outer ring; the tapered rollers, or rolling elements; and the cage, or roller retainer. The taper angles allow the bearing to handle a combination of radial and thrust loads. The steeper the cup a More »

Spherical Roller Bearings

Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present. Design Attributes:Expertly designed critical dimensions such as roller and raceway contact geometry and topography imp More »

Self-Aligning Ball Bearings

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some ex More »

Cylindrical Roller Bearings

In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds. There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearin More »

Thrust Ball Bearings

Thrust ball bearings provide optimum performance in high speed applications. Thrust ball bearings provide axial rigidity but are not recommended for applications experiencing any radial loads. Design AttributesAvailable in single direction and double direction designsSuitable for relatively hig More »

Angular Contact Ball Bearings

The TG range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Design Attributes More »