• Tapered Roller Bearings

  • Tapered roller bearings consist of four interdependent components: the cone, or inner ring; the cup, or outer ring; the tapered rollers, or rolling elements; and the cage, or roller retainer. The taper angles allow the bearing to handle a combination of radial and thrust loads. The steeper the cup angle, the greater the ability of the bearing to handle thrust loads.

    Design Attributes :
    Single cone and cup.
    One-piece pressed steel cage retains rollers on the cone and spaces them evenly.


    Typical applications:
    Machine tool spindles
    Gear reduction units
    Automotive transaxles


    Product List

    Single-Row Tapered Roller Bearings

    The most basic and widely used tapered

    bearing, the single-row type consists of the

    cone assembly and the cup. It is usually fitted

     as one of an opposing pair. During equipment

    assembly, single-row bearings can be set to the

    required clearance or preload condition to optimize



    Double-Row Tapered Roller Bearings

    Double- or two-row tapered roller bearings

    feature double cups and two single cones.

    They are available in a variety of configurations

    for general industrial and automotive applications.

    Four-Row Tapered Roller Bearings

    Four-row bearings combine the inherent

    high-load, radial/thrust capacity and

    direct/indirect mounting variables of

    tapered roller bearings into assemblies

    of maximum load rating in minimum space.


    Tapered roller beating generally use die stamping steel plate basket cage,also can use machined solid cage if its dimension is bigger.

    Allowable angle error

    Tapered roller beating generally is inadmissibility inclination between axis and case shell hole.If there is,can’t be bigger than 2'

     Only after arrangement single row tapered roller beating could appear clearance,and should be detemined after adjusted by another right-about localization bearing.The clearance of double row and four row tapered roller bearing can be provided with relevant standard according to the requirement of the customers.


CopyRight©2002-2023 All rights reserved: TG Bearing Co., Ltd.